当前位置:首页 >> 产品目录 >> 天然蛋白/Natural Proteins >> 人纤维连接蛋白/Human Fibronectin

人纤维连接蛋白/Human Fibronectin

产品编号:PRO-448
产品规格:200μg/1mg/10mg
价  格:700.00/1800.00/
供 应 商:ProSpec
库  存:常年库存
热线电话:021-54253791,64693763
QQ交谈        咨询订购

Catalogue Number PRO-448
Introduction Plasma fibronectin level is elevated in severe coronary artery disease. Increased plasma fibronectin levels are related with venous thromboembolism (VTE) particularly in males, and extend the probable association between biomarkers and risk factors for arterial atherothrombosis and VTE. Fibronectin plays a role in several cellular processes, including tissue repair, embryogenesis, blood clotting, and cell migration/adhesion. Fibronectin consists in two main forms: 1) as an insoluble glycoprotein dimer that serves as a linker in the etracellular matrix and 2) as a soluble disulphide linked dimer found in the plasma. The plasma form is produced by hepatocytes, and the ECM form is synthesized by fibroblasts, chondrocytes, endothelial cells, macrophages, as well as certain epithelial cells. Fibronectin alos takes part as a general cell adhesion molecule by anchoring cells to collagen or proteoglycan substrates. Fibronectin organizes cellular interaction with the ECM by binding to different components of the extracellular matrix and to membrane-bound Fibronectin receptors on cell surfaces. Molecular Weight 450kDa.
Source Human Plasma.
Physical Appearance Sterile Filtered White lyophilized (freeze-dried) powder.
Formulation The Fibronectin was lyophilized from a concentrated 1mg/ml solution containing 0.05M Tris Cl pH-7.5 and 0.1M NaCl.
Solubility Purified fibronectin has a tendency to form insoluble aggregates upon reconstitution. We suggest reconstituting the 1mg Fibronectin with a chaotropic agent such as urea at room temperature at a concentration of 0.2mg/ml using sterile water.
Let stand 1-2 hours.
Stability Store the lyophilized fibronectin at 4°C. Upon reconstitution fibronectin should be stored at 4°C for 2 weeks and for future use below -18°C.
Please prevent freeze-thaw cycles.
Purity Greater than 95.0% as determined by SDS-PAGE.
Cell Culture Application Fibronectin is useful for the induction of cell attachment to a variety of surfaces including plastic and glass tissue culture labware, petri dishes, coverslips, microcarrier beads, etc. Fibronectin is useful for growth and maintenance of cells in low serum conditions. In general, the reconstituted fibronectin should be diluted with sterile physiological saline or serum-free medium to a concentration of 10-50ug/ml. The plates are treated with the solution, at room temperature 1-2 hours, the supernatant removed and the plates rinsed with fresh media or buffer. Growth media is then added and the coated plates seeded with a suspension of freshly harvested cells. Care should be taken to inactivate serum proteases used in the preparation of the cells, since fibronectin is very sensitive to proteolysis. Optimum concentration of fibronectin depends on the types of cell and the particular surface used. Generally, use 1-5ug/cm2 of growth surface.
Usage ProSpec's products are furnished for LABORATORY RESEARCH USE ONLY. The product may not be used as drugs, agricultural or pesticidal products, food additives or household chemicals.

中文翻译,仅供参考:

产品描述:

在患有严重冠状动脉疾病患者体内,血浆纤维连接蛋白含量升高。血浆纤维连接蛋白含量的升高与静脉血栓栓塞(VTE)有关,尤其是男性。它可以作为动脉粥样硬化和静脉血栓栓塞的生物标志物和危险因素。纤维连接蛋白在细胞方面的作用包括:组织修复,胚胎发育,血液凝固,细胞迁移/粘合。纤维连接蛋白包括两种主要形式:1)作为一种不溶性糖蛋白二聚体,与细胞外连接。2)作为一种可溶性二硫化物,连接血浆中的二聚体。血浆是由肝细胞合成的,细胞外基质是由成纤维细胞,软骨细胞,内皮细胞,巨噬细胞,以及某些上皮细胞合成的。纤维连接蛋白作为一种细胞黏附分子将细胞锚定到胶原蛋白或蛋白多糖基质上。纤维连接蛋白通过结合到不同的细胞外组分以及结合到细胞表面膜结合纤维连接蛋白受体上,从而与细胞外基质发生细胞相互作用。分子量为450kDa

来源:

人血浆

货号: PRO-448

物理性质:

冻干无菌过滤白色(冻干)粉.

剂型:

纤维连接蛋白是从浓度为1mg/ml,含0.05MTris HCl( pH7.5)0.1M的氯化钠溶液中冻干而来的。

溶解性:

纯化的纤维连接蛋白在重悬后很容易形成不溶性聚合物。我们建议使用离液序列高的试剂如尿素,在室温下重悬1mg的纤维连接蛋白,使其浓度达到0.2mg/ml

静置1-2小时。

稳定性:

冻干的淋巴细胞分离液虽然在室温可以贮存1星期,最好贮存在-18°C以下。

重悬的纤维连接蛋白4°C可以保存2-7天。长期保存要贮存在-18°C以下。

不要反复冻融。

纯度:

SDS-PAGE检测,纯度大于95.0%

细胞培养应用:

纤维连接蛋白在诱导细胞黏附到各种表面包括塑料,玻璃组织培养器皿,培养皿,盖玻片,微载体磁珠,等非常有用。纤维连接蛋白能够使细胞在低血清培养基中生长。一般来说,应该用无菌生理盐水或无血清培养基重悬纤维连接蛋白,使稀释的浓度保持在10-50ug/ml。用溶液室温处理培养皿1-2小时,然后弃掉液体,用新鲜培养基或者缓冲液冲洗培养皿。加入生长培养基,然后在包被的培养皿中接种新鲜的细胞悬液。应注意要在培养的细胞中加入灭活的血清蛋白酶,因为纤维连接蛋白很容易水解。最佳的纤维连接蛋白浓度取决于细胞类型和使用表面积。一般来说,使用生长面积为1-5ug/cm2

用法:

ProSpec的产品只能用于科学研究。ProSpec的产品不能用于药物,农业或者杀虫产品,食物添加剂或者家用化学药品。

相关产品
版权所有 2004-2011 上海博晗生物科技有限公司
欢迎拨打服务热线: 021-54253791,64693763 邮箱: order@biosun.cn
沪ICP备1021340号